Printed Vinyl Evolved Baits Logo measuring 12inches wide x 3.5inches high
Suitable for applying to Vehicles and Equipment
Please note there is no grey background as shown in the pictures, these are professionally printed and cut letters, they come backed up ready to lay as one, not individual letters.
High durability vinyl printed. cut to shape and over laminated to protect and
increase the life of the print and sticker,
To apply the sticker
IF YOUR CONFIDENT THEN SIMPLY STICK IT ON THE CAR!!..IF NOT. FOLLOW THE 5 STEPS BELOW
1. Clean the vehicle where the sticker is going to be placed
2. Spray clean water onto the area of the vehicle where the sticker is going to be applied
3. Remove the white backing paper, wet the sticky side of the sticker (don't be afraid, soak it)
4. Apply the sticker to the vehicle and before applying pressure check the levelling of the sticker and it is where you want it to be, then using a plastic card such as a credit card, press down on the middle of the sticker apply a little pressure and drag the plastic card to the edge of the sticker helping to remove the water, do this in all directions.
5. Allow to dry, could take a few hours or a day or two depending on the ambient temperature, any bubbles left behind should subside over the next few days, this will either be air bubbles or water bubbles
Q - why do you use water?
A - we recommend you use water when you mount the sticker to the car, if you are not happy with the placement it is easy to lift the sticker back off the vehicle and re-apply. if no water is used then you will have real problems removing the sticker